Sheetwisebeta
Layout Sample

Modern TV Stand Plywood Cut Example

This sample demonstrates how five rectangular 3/4-inch plywood parts fit onto a single standard 4x8 sheet using our local calculation engine.

Only the 3/4-inch plywood panel subset, not a complete furniture plan

Sheet & Cut Settings

Stock sheet
96 × 48 in
Material
3/4 in plywood
Saw kerf
1/8 in
Edge trim
0 in
Rotation
Off

Panel Cut List

PartLength (in)Width (in)Qty
A Top / bottom7215 1/22
B Sides18 1/215 1/22
C Divider18 1/215 3/81

Layout Results

1sheet
5 / 5parts placed
67.1%material used
Modern TV Stand Plywood Cut Example96 inchesA1: Top / bottom — 72 × 15 1/2 inA172 × 15 1/2A2: Top / bottom — 72 × 15 1/2 inA272 × 15 1/2B1: Sides — 18 1/2 × 15 1/2 inB118 1/2 × 15 1/2B2: Sides — 18 1/2 × 15 1/2 inB218 1/2 × 15 1/2C1: Divider — 18 1/2 × 15 3/8 inC118 1/2 × 15 3/848 inches wide · 1/8 inch kerf · Rotation off
The calculation places all 5 parts onto 1 sheet measuring 96 by 48 inches with 1/8-inch kerf, reaching 67.1% sheet utilization without grain rotation.
Load these sample parts into the calculator

Example Limitations

  • Project panels only: excludes doors, back, base, hardware, and assembly steps.
  • Layout settings reflect our explicit example assumptions, not manufacturer cutting instructions.
  • Calculated as a preliminary diagram; no physical workshop build or cutting has been verified.
  • Generated using our own computed SVG layout without copying external plan illustrations.

Plan Attribution

Dimensions referenced from the public modern TV stand project on learn.kregtool.com. Cited for source attribution only, with no affiliation or endorsement.

Kreg: Modern TV Stand ↗